Sample analysis
A real government tender, analysed by TenderTez
This is what TenderTez produced for a public tender: AIIMS Bhubaneswar, NIT No. AIIMS/BBSR/ENGG./ELECT./11/2026: supply, installation, testing and commissioning of pump motor sets for pump houses and STPs (35 pages, original PDF). Nothing has been edited. Tap a page number to see the text each point came from, or open that page of the PDF.
The tender closed on 30 May 2026; it is here only as an example. Analysed on 16 Oct 2026. Before publishing this page we checked each quoted line against the PDF; one list that starts on page 25 continues on page 26.
Analyse your own tender free First 5 tenders free, no card.
Key facts
Dates
- Online tender submission deadline: “By 30/05/2026 at 18:00 Hours”
- Original EMD hard-copy submission deadline: “To be submitted by 31/05/2026 by 16.00 hours.”
- Technical bid opening: “On 01/06/2026 at 12:00 Hours.”
- Financial bid opening: “To be informed later through website”
- Turnover assessment period end: “ending 31st March 2025”
- Online opening of Technical Bids: “On 01/06/2026 at 12:00 Hours.”
Points worth a second look (17)
Clauses that can cost a bidder money or the bid, as flagged in the analysis.
- The stated completion period is inconsistent: the tender overview states 60 days, while the penalty clause states all work must be completed within one month from issue of the work order.
- Original EMD must be physically delivered by 31 May 2026 at 16:00, after the online submission deadline of 30 May 2026 at 18:00; a bidder should ensure compliance with both deadlines.
- EMD exemption is expressly disallowed, and failure to provide the required EMD can lead to rejection.
- Delay penalty is 2% per month, computed on a per-day basis, capped at 10% of total tender value.
- AIIMS reserves the right to reject any or all bids without assigning reasons, including the lowest bid.
- Non-compliance with contract terms may result in bid rejection at any stage and suspension of the firm for one year, with nothing payable by AIIMS.
- The scope deems any facility not mentioned but considered vital to the work as included, creating potential scope ambiguity without extra payment.
- No compensation is payable for damage caused by listed natural calamities; the contractor must make good damage at its own cost.
- Engineer-in-Charge/security/local-authority restrictions must be followed, with no extra payment and no delay claim.
- Failure to furnish the prescribed performance guarantee may result in debarment from AIIMS tenders for one year; failure to commence work can result in absolute forfeiture of performance guarantee.
- Back-to-back execution of eligible similar work can lead to perpetual debarment, and before start of work can lead to forfeiture of the entire performance guarantee.
- The Integrity Pact permits forfeiture of the entire Performance Guarantee and Security Deposit following specified disqualification or termination circumstances.
- Disputes or differences under the Integrity Pact are expressly excluded from arbitration.
- BOQ quantities are expressly tentative and may increase or decrease according to site requirements.
- The contractor has no claim if required to use only the Engineer-In-Charge-approved material sample.
- Mismatch between physical EMD instrument details, scanned copy, and online-entered data will cause rejection of the uploaded bid.
- Modification of the provided BoQ file by the bidder will cause bid rejection.
Submission checklist (64 items)
Every condition and document the tender asks for, documents first. In your account you tick items off and download it as Excel.
Documents 15
- CA-certified turnover certificate Upload an affidavit or certificate from a Chartered Accountant stating financial turnover for the specified period; further details may be requested after technical-bid opening.
- Upload eligibility documents Upload scanned eligibility documents and EMD within the tender-submission period, including Appendix A to C, similar-work experience and completion certificates, GST registration, PAN card, undertakings, electrical licence, tender-specific OEM authorization, declarations, and signed/sealed tender pages.
- Original EMD hard copy deadline Original EMD hard copy must be submitted to the Executive Engineer (Electrical), Room No. 336, Academic Building, AIIMS Bhubaneswar by 31 May 2026 at 16:00 hours; eligibility is considered based on uploaded documents.
- Post-execution billing documents After execution, vendor must submit work-completion declaration, testing and commissioning certificate, material test certificate, warranty/guarantee certificate, colour photos of executed work, NOC regarding work, up-to-date GST-return voucher, and bank-account details with the bill.
- OEM and test reports After material supply, the contractor must submit the company/OEM test report, IR test, and dry-run test.
- Payment supporting documents The vendor must submit work-completion declaration, testing and commissioning certificate, material test certificate, warranty/guarantee certificate, colour photos on glossary paper, NOC regarding work, up-to-date GST return voucher, and bank account details with the bill.
- Notarized tender form The tender form is to be submitted on notarized non-judicial stamp paper of Rs. 10 or above.
- Affidavit of non-blacklisting and bid correctness The bidder must certify that the firm has never been blacklisted, will supply to the institution's specifications and comply with tender terms, and that bid information is true and correct.
- Signed Integrity Pact A duly signed Integrity Pact must be submitted with the tender; bidders that do not submit it are disqualified from the tender process.
- Performance guarantee and programme chart submission Submit performance guarantee and Programme Chart (Time & Progress) within 7 days from issue of letter of acceptance.
- Required bid documents and covers Bidder must follow the tender advertisement and Tender Enquiry Document regarding required documents, number of covers, and the names and contents of documents to be submitted. Deviations may result in rejection.
- Legible uploaded scans The bidder is responsible for ensuring that uploaded scanned documents are legible.
- Use prescribed financial bid and BoQ format Financial bids must be submitted in the provided format only. Where a standard BoQ is provided, bidders must download it, fill only white unprotected cells with financial quotes and bidder details, save it, and submit it online without changing the filename.
- No BoQ file modification The bid will be rejected if the BoQ file is found modified by the bidder.
- Print bid submission acknowledgement After successful and timely bid submission, the bid summary must be printed and retained as acknowledgement; it may be used as an entry pass for bid-opening meetings.
Financial 17
- Average annual turnover Average annual financial turnover for the last three years ending 31 March 2025 must exceed 50% of the estimated cost.
- EMD submission Submit EMD equal to 2% of estimated value by DD, PBG, or FDR; upload the scanned copy and submit original DD with technical-bid documents. Bids without EMD demand drafts will be rejected. EMD exemption is not allowed.
- No EMD exemption EMD exemption is not permitted for this work.
- Performance guarantee Successful contractor must furnish performance guarantee equal to 5% of contract value, as FDR or bank guarantee from a scheduled bank, valid for six months beyond completion of all contractual obligations. Failure to deposit it can result in EMD forfeiture.
- Quoted rates inclusive of taxes and charges Quoted percentage rates must include GST, other applicable taxes and levies, labour welfare cess, and applicable water and electricity charges; no reimbursement claim will be entertained.
- Earnest Money Deposit Earnest Money is stated as 2% of the estimated cost.
- Performance Guarantee Performance Guarantee is stated as 5% of the tendered value.
- Security Deposit Security Deposit is stated as 2.5% of the tendered value; it is deducted from running bills and released after successful completion of the DLP without interest.
- Labour cess deduction Labour cess of 1% will be deducted from bills.
- Income tax deduction Applicable income tax will be deducted from bills unless exempted by the Income Tax Department.
- Water charge deduction If water is used from AIIMS Bhubaneswar, water charges will be deducted at 1% of the gross bill amount.
- Delay penalty Failure to complete work by the stipulated date attracts a penalty of 2% per month of delay, computed on a per-day basis, subject to a maximum of 10% of accepted tendered value.
- Online financial bid submission The bidder must submit the financial bid in online mode.
- No additional charges payable No charges other than those specified are payable by the Institute.
- GST-inclusive rates Quoted rates must include applicable GST.
- EMD payment and original instrument submission Bidder must select offline payment for Bid Security/EMD, enter instrument details, prepare EMD as instructed, and send the original instrument to the concerned official by the last bid-submission date or as otherwise specified in the Tender Enquiry Document.
- EMD details must match Details of the physically sent DD or other accepted instrument must match the scanned-copy details and the data entered at bid submission; otherwise the uploaded bid will be rejected.
Experience 2
- Similar-work experience threshold Bidder must have completed, in the last seven years ending on the tender-submission deadline, either three similar works of at least 40% of estimated cost each, two similar works of at least 60% each, or one similar work of at least 80%. Similar work means supply and installation of various types of pump motor sets.
- Eligible experience sources Similar-work experience must be from Central Government, State Government, PSU, or Autonomous Body.
Certifications 4
- Valid Class-III digital signature Intending bidder must have a valid Class-III digital signature to submit the bid.
- EPF and ESI registrations Contractor must hold registration with the Employees’ Provident Fund Commissioner and Employees’ State Insurance Corporation and obtain other legally required statutory approvals.
- Valid digital signature certificate For CPP Portal enrolment, bidders must register a valid Class II or Class III Digital Signature Certificate with signing-key usage, issued by a Certifying Authority recognized by CCA India.
- One DSC per bidder Only one valid DSC may be registered by a bidder; bidders are responsible for ensuring their DSC is not lent to others.
Licences 2
- Valid electrical licence Bidder must be a valid Electrical licence holder (MV or Above); copies of the valid Electrical License issued or endorsed by ELBO, Odisha must be uploaded.
- Labour licences and statutory registrations Submit applicable labour licences and registration with EPFO, ESIC, and BOCW Welfare Board, or proof of applying for them, within 7 days of issue of the letter of acceptance.
Legal 5
- No canvassing or fraudulent practices Canvassing is prohibited and may lead to rejection. The contractor may be debarred for false experience/completion certificates, failure to commence work by scheduled work-order date, or violation of important contract conditions.
- Labour-law and worker compliance Agency is solely responsible for compliance with labour and industrial laws, wages, EPF, bonus, gratuity, ESI, worker insurance, and timely wage payment irrespective of delay in bill settlement.
- No back-to-back execution of eligible similar work The bidder undertakes that eligible similar works have not been executed through another contractor or on a back-to-back basis.
- Confidentiality of tender documents Tender documents, drawings, and records connected with the work must be treated as secret/confidential and not communicated or used in a manner prejudicial to State safety.
- Acceptance of tender terms Bidder confirms acceptance of and agreement to abide by the tender terms and conditions.
Technical 5
- Material approval before procurement The contractor must obtain Engineer-in-Charge approval for materials before procurement and actual use at site.
- Replacement of defective supplied material Material with a defect or damage observed at the time of supply must be replaced with new material.
- Applicable technical standards Work must be executed strictly according to attached technical specifications, relevant IS specifications, Indian Electricity Rules, and National Electrical Code.
- Minor building works included Scope includes minor building works necessary for execution, including wall cutting and making good; no extra payment is payable.
- Work commencement Start work within seven days after issue of work order.
Manpower 1
- Technical representatives For agreement amount up to Rs. 150 lakhs, provide two Principal Technical Representatives: Graduate Electrical Engineer with 2 years' experience or Diploma Engineer with 5 years' experience. Recovery for non-compliance is Rs. 30,000.00.
Equipment 1
- Contractor-provided tools and equipment Contractor must arrange all T&P, ladders/Hydra, electrical instruments, consumables, and contingent articles required for execution of internal electrification work.
OEM 4
- Tender-specific OEM authorization Tender-specific OEM Authorization Certificate (Appendix D) must be uploaded; failure results in summary rejection. The OEM authorization must be on OEM letterhead and signed by an authorized person from the OEM of approved make.
- Approved makes and model approval Pump makes are restricted to Kirloskar Brothers Limited for monobloc/submersible pumps and KSB Amarex for sludge pumps with cutter, stated for compatibility with existing pumps. Makes and models must be approved before ordering, with relevant test certificates/documents and samples submitted; the Engineer-in-Charge's decision is binding and no variation is acceptable.
- Material samples and approval Contractor must bring samples of the specified preferred brands. Engineer-In-Charge will approve one sample, and the contractor must use only material matching that approved sample.
- Approval for alternate make If material of the approved make is unavailable, prior approval of the Engineer-In-Charge is required before using another make.
Special conditions 8
- Two-bid online tender submission Tender must be submitted online in two parts: Technical Bid and Financial Bid.
- Conditional bids rejected Conditional bids will not be considered and will be rejected; conditional bids are treated as unresponsive.
- Site restrictions without extra payment Contractor must follow security-related restrictions on working hours and vehicle movement, adjust execution programme accordingly, and no extra payment will be made for this.
- Unspecified vital facilities included Any facility not stated in the scope but vital to the stated supply, installation, testing, and commissioning work is deemed included in scope.
- Firm rates Tenderers must quote their own rates for each scheduled item, and rates remain firm for the contract.
- Tentative quantities The stated quantities may increase or decrease according to site requirements.
- No claim regarding sample approval No claim regarding the approved material sample will be entertained.
- Server time governs deadlines The server time displayed on the bidder dashboard is the standard time for bid-submission and bid-opening deadlines, and bidders must follow it.
Bill of quantities (19 items)
| # | Item | Qty | Unit | Page |
|---|---|---|---|---|
| 1 | Supplying, Installation, Testing and commissioning of 30 HP Monobloc Pump.Suction 100 mm; delivery 80 mm; head range 48–68 m; discharge range 10–28 lps; Three Phase, 415 V; Make: Kirloskar KDS-3068+.Rate: ₹1,92,877.44; Amount: ₹1,92,877.44 | 1 | Nos | p.30 |
| 2 | Supplying, Installation, Testing and commissioning of 20 HP Monobloc Pump.Suction 100 mm; delivery 80 mm; head range 28–52 m; discharge range 2–30.4 lps; Three Phase, 415 V; Make: Kirloskar KDS-2050+.Rate: ₹1,25,800.00; Amount: ₹1,25,800.00 | 1 | Nos | p.30 |
| 3 | Supplying, Installation, Testing and commissioning of 20 HP Two-Stage Monobloc Pump.Suction 80 mm; delivery 65 mm; head range 40–72 m; discharge range 8–20 lps; Three Phase, 415 V; Make: Kirloskar KDT-2070+.Rate: ₹1,45,200.00; Amount: ₹5,80,800.00 | 4 | Nos | p.30 |
| 4 | Supplying, Installation, Testing and commissioning of 15 HP Monobloc Pump.Suction 100 mm; delivery 100 mm; head up to 30 m; discharge up to 18 lps; Three Phase, 415 V; Make: Kirloskar KDS-1537+.Rate: ₹94,028.34; Amount: ₹94,028.34 | 1 | Nos | p.30 |
| 5 | Supplying, Installation, Testing and commissioning of 7.5 HP Monobloc Pump.Suction 80 mm; delivery 65 mm; head range 24–48 m; discharge range 5.2–12.6 lps; Three Phase, 400 V; Make: Kirloskar KDS-830++.Rate: ₹61,186.08; Amount: ₹1,22,372.16 | 2 | Nos | p.30 |
| 6 | Supplying, Installation, Testing and commissioning of 7.5 HP Monobloc Pump.Suction 65 mm; delivery 65 mm; head range 32–64 m; discharge range 2.8–7.6 lps; Three Phase, 400 V; Make: Kirloskar KDS-837+.Rate: ₹60,000.00; Amount: ₹1,20,000.00 | 2 | Nos | p.30 |
| 7 | Supplying, Installation, Testing and commissioning of 7.5 HP Monobloc Pump.Suction 65 mm; delivery 50 mm; Three Phase, 400 V; Make: Kirloskar KDT-864+.Rate: ₹75,684.60; Amount: ₹75,684.60 | 1 | Nos | p.30 |
| 8 | Supplying, Installation, Testing and commissioning of 5 HP Monobloc Pump.Suction 65 mm; delivery 50 mm; head range 6–40 m; discharge range 4–9 lps; Three Phase, 415 V; Make: Kirloskar KDI-538+.Rate: ₹45,144.96; Amount: ₹45,144.96 | 1 | Nos | p.30 |
| 9 | Supplying, Installation, Testing and commissioning of 5 HP Monobloc Pump.Suction 50 mm; delivery 40 mm; head range 36–52 m; discharge range 2–4.1 lps; Three Phase, 400 V; Make: Kirloskar KDS-550++.Rate: ₹46,000.00; Amount: ₹92,000.00 | 2 | Nos | p.30 |
| 10 | Supplying, Installation, Testing and commissioning of 5 HP Monobloc Pump.Suction 50 mm; delivery 40 mm; Three Phase, 400 V; Make: Kirloskar KDT-568+.Rate: ₹47,342.26; Amount: ₹94,684.52 | 2 | Nos | p.30 |
| 11 | Supplying, Installation, Testing and commissioning of 3 HP Dewatering Pump.Suction 50 mm; delivery 50 mm; head range 9–23 m; discharge range 2–9 lps; Three Phase, 415 V; Make: Kirloskar SP-2HM.Rate: ₹46,900.00; Amount: ₹46,900.00 | 1 | Nos | p.30 |
| 12 | Supplying, Installation, Testing and commissioning of 3 HP Monobloc Pump.Suction 50 mm; delivery 40 mm; head range 12–36 m; discharge range 2–5 lps; Three Phase, 415 V; Make: Kirloskar KDS-335++.Unit rate ₹36,514.20; amount ₹36,514.20. | 1 | Nos | p.31 |
| 13 | Supplying, Installation, Testing and commissioning of 5 HP Sludge Pump with Cutter.Suction 50 mm; delivery 50 mm; Three Phase, 415 V; head up to 49 m; discharge up to 21.9 m³/hr; IP68 protection; cast iron body; stainless steel shaft; double mechanical seal; suitable for handling sewage/sludge containing solids up to 10 mm; Model: Amarex IN S50-222/042.Unit rate ₹1,37,297.00; amount ₹8,23,782.00. | 6 | Nos | p.31 |
| 14 | Supplying, Installation, testing and commissioning of 3 HP Sludge Pump with Cutter.Suction 50 mm; delivery 50 mm; Three Phase, 415 V; head up to 39 m; discharge up to 21.3 m³/hr; IP68 protection; cast iron body; stainless steel shaft; double mechanical seal; suitable for handling sewage/sludge containing solids up to 10 mm; Model: Amarex IN S50-222/032.Unit rate ₹1,30,737.00; amount ₹5,22,948.00. | 4 | Nos | p.31 |
| 15 | Supplying, Installation, Testing and commissioning of 2 HP Sludge Pump with Cutter.Suction 50 mm; delivery 50 mm; Three Phase, 415 V; head up to 33 m; discharge up to 21.2 m³/hr; IP68 protection; cast iron body; stainless steel shaft; double mechanical seal; suitable for handling sewage/sludge containing solids up to 10 mm; Model: Amarex IN S50-172/012.Unit rate ₹1,29,550.00; amount ₹5,18,200.00. | 4 | Nos | p.31 |
| 16 | Supplying, Installation, Testing and commissioning of 3 HP Borewell Submersible Pump.Suction suitable for borewell application; head range 28–140 m; discharge range 0.33–1.75 lps; Three Phase, 415 V; Make: Kirloskar KS4D-3017T.Unit rate ₹35,800.00; amount ₹35,800.00. | 1 | Nos | p.31 |
| 17 | Supply of 4C X 10 SQ.MM. 1.1 KV Copper conductor, PVC round sheathed cable.In conformity to the technical specification and as per IS 694:2010.Unit rate ₹1,610.00; amount ₹4,83,000.00. | 300 | Mtr | p.31 |
| 18 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade on wall surface.Up to 35 sq. mm; clamped with 1 mm thick saddle.Unit rate ₹64.00; amount ₹19,200.00. | 300 | Mtr | p.31 |
| 19 | Supplying and making end termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade.Cable size: 4 X 10 sqmm (25 mm).Unit rate ₹325.00; amount ₹5,850.00. | 18 | Each | p.31 |
What you also get with your own tenders
- Each condition checked against your company profile, with the reason
- A bid tracker with your deadlines, EMD and bank guarantees
- Corrigendum check: what an amendment changed, quoted with its page
- The tender’s own annexures drafted as Word files from your details