# How to check eligibility in a government tender

> Check turnover, similar-work experience, registrations and exemptions in a government tender, clause by clause, before you spend on a bid.

Canonical: https://tendertez.in/guides/tender-eligibility-check
Last updated: 2026-10-24

[TenderTez guides](https://tendertez.in/guides) · Sources checked 24 October 2026

To check eligibility in an Indian government tender, find its eligibility section and test your company against each condition in turn: registration and class, turnover, similar-work experience, certificates and any exemption you claim. Use the exact numbers, years and proof the tender asks for, then read every corrigendum, because corrigenda change eligibility too. The tender’s own wording decides: two tenders for similar work can set different thresholds.

## Step 1: Find every place eligibility is written

Eligibility is rarely in one place. Look in the notice inviting tender (NIT), the instructions to bidders, the “qualification” or “eligibility criteria” section, the bid data sheet (on GeM, the first pages of the bid document), the additional terms and conditions (ATC on GeM) and every corrigendum. Note the page of each condition so you can find it again.

## Step 2: Check registration and class

Works tenders often admit only contractors registered in a stated class with named departments. An All India Radio civil construction tender in CPWD format, for example, invites bids from “approved and eligible contractor of CPWD / MES / BSNL / MTNL / Railway / West Bengal State PWD”. If your registration isn’t on the list, you are not eligible, however strong your experience.

## Step 3: Check the turnover clause in four parts

A turnover clause can fail you in four ways. Answer each one:

1. **Which years?** The last three financial years, three of the last five, or another window.
2. **Average or every year?** An average lets one weak year pass; “in each year” does not.
3. **Whole company or the tendered item?** Some tenders count only turnover from the item or service being bought.
4. **What proof?** Audited statements, a chartered accountant’s certificate in a set format, or both.

Compare your audited figures, not estimates, with the exact percentage of the estimated cost the tender sets.

## Step 4: Check similar-work experience: count, value and window

Experience clauses usually let you qualify in one of three ways, and the numbers differ between tenders:

| Tender | Three similar works, each at least | Two, each at least | One, at least | Window |
| --- | --- | --- | --- | --- |
| All India Radio civil works tender (CPWD format) | 40% of estimated cost | 60% | 80% | Last 7 years |
| GeM services bid GEM/2024/B/5263261 (7 Aug 2024) | 40% of estimated cost | 50% | 80% | Current financial year and the last 3 |

Two details decide many bids:

- **Older works can be brought up to today’s value,** if the tender allows it. The All India Radio tender raises the value of past work “at simple rate of 7 % per annum” from completion to the last date of application.
- **“Similar work” is defined, and the definition can change.** An IIT Kanpur corrigendum of 5 May 2026 changed it from renovation and maintenance work to construction work in residential and office buildings (see [what a corrigendum can change](https://tendertez.in/guides/tender-corrigendum)).

## Step 5: Check exemptions before you rule yourself out

On GeM, a buyer can exempt micro and small enterprises (MSEs) and startups from the turnover and experience criteria. The bid’s first page shows “MSE Exemption for Years Of Experience and Turnover” and “Startup Exemption” as Yes or No; in GEM/2024/B/5263261 both are Yes. The exemption is “subject to meeting of quality and technical specifications”, and the documents proving it “must be uploaded for evaluation by the buyer”.

EMD exemption is a separate rule: see [EMD exemption for MSEs and startups](https://tendertez.in/guides/emd-exemption).

## Step 6: List the proof for each condition

For each condition, write down the exact document you will upload: registration certificate, audited balance sheets, CA certificate, completion certificates or work orders, Udyam or DPIIT certificate. Check that each is valid on the closing date. Missing or expired proof fails a bid as surely as a missed threshold.

## Step 7: Read every corrigendum, then decide

Corrigenda change thresholds, registration lists and definitions after you have read the tender. Check for them the day before you submit, and test again any condition they touch.

## Common mistakes

- Using the turnover of the wrong years, or an average where “each year” is required.
- Counting ongoing or unrelated work as “similar work”.
- Missing that the two-works tier is 60%, not 50% (or the other way round).
- Claiming an MSE or startup exemption the bid doesn’t allow, or without uploading proof.
- Checking the original tender but not the corrigendum.

## Questions

### What is eligibility criteria in a tender?

The conditions a bidder must meet for its bid to be considered: usually registration, turnover, similar-work experience, certificates and sometimes location or manufacturer status. They are set in the tender document and its corrigenda.

### How is average annual turnover calculated for a tender?

Add the turnover for the financial years the tender names and divide by their number, using audited figures. Check whether the tender wants an average or a minimum in each year, and whether only turnover from the tendered item counts.

### What counts as “similar work”?

Whatever the tender’s definition says. Look for a “definition of similar work” clause; it can be narrow, and a corrigendum can change it.

### Can older completed works count at today’s value?

Only if the tender says so. Some CPWD-format tenders increase past work value at a simple 7% a year to the last date of application.

### Are MSEs and startups exempt from turnover and experience criteria?

On GeM, only when the bid shows the MSE or startup exemption as Yes, subject to meeting quality and technical specifications, with proof uploaded. Outside GeM, check the tender.

### Can I bid if I meet everything except one condition?

Usually the bid will be rejected on that condition. If a clause is unclear, ask in the pre-bid meeting or by the query date; answers usually come in writing as a corrigendum or minutes.

### Where do I find corrigenda?

On the tender’s page on the portal where it was published, and on the buyer’s website if the notice says so.

## Sources

Read in full on 24 October 2026. Where a rule differs, the tender in front of you decides.

- [All India Radio, Civil Construction Wing, Kolkata: e-tender instructions (CPWD format)](https://prasarbharati.gov.in/wp-content/uploads/2024/04/Engineering_673527.pdf): registrations accepted, the 40/60/80% experience tiers over 7 years, and the 7% a year escalation
- [GeM bid GEM/2024/B/5263261, 7 August 2024 (Raman Research Institute)](https://www.rri.res.in/sites/default/files/2024-08/GeM-Bidding-5263261.pdf): MSE and startup exemptions from turnover and experience, and the 40/50/80% experience tiers
- [IIT Kanpur Institute Works Department: corrigendum of 5 May 2026 to NIT 06/Civil/D2/2025-26](https://www.iitk.ac.in/iwd/file/2026/06-Civil-D2-2026-27/Corrigendum.pdf): a corrigendum that changed the definition of similar work

## More guides

- [EMD exemption for MSEs and startups: who qualifies and how to claim it](https://tendertez.in/guides/emd-exemption)
- [EMD calculator: work out EMD and performance security for a tender](https://tendertez.in/guides/emd-calculator)
- [What is a corrigendum in a tender? Meaning, what it changes and how to check](https://tendertez.in/guides/tender-corrigendum)

## Related
- [TenderTez guides](https://tendertez.in/guides)
- [what a corrigendum can change](https://tendertez.in/guides/tender-corrigendum)
- [EMD exemption for MSEs and startups](https://tendertez.in/guides/emd-exemption)
- [EMD calculator: work out EMD and performance security for a tender](https://tendertez.in/guides/emd-calculator)
